SPASA ROADSHOW – BE COMPLIANT & SUMMER READY – INNOVATION TIGHTLOC IS HERE

Summer Ready, Safety & Security.

As summer approaches, it’s time to ensure your backyard and pool area is not only inviting but also safe. One of the most critical elements of pool safety is having secure, properly functioning gates and fences. Side gates and pool gates can
become hazards if they aren’t maintained, but a few simple checks and some regular care can keep everything in perfect working order.

Polaris Hinges are designed to withstand the harshest conditions while keeping your family safe. However, like all
high-quality products, they need a little TLC to keep performing at their best.

Simple Steps to Keep Your Polaris Hinges in Top Shape

To ensure your Polaris hinges and gates are functioning properly, follow these simple steps.

1. Inspect Your Gates
Stand about three metres away from your pool gate and observe its alignment with the surrounding panels. Look for the following:

• Top Alignment: Ensure the top of the gate is level with the panels on either side.

• Hinge Position: Check if the hinge is still square and level on the glass.

• Consistent Gaps: Verify that the gap between the gate and the panels is consistent from top to bottom.

• Latch Alignment: Make sure the latch is square, level, & both sides line up evenly.

If any of these components look off, we recommend calling a professional to realign your gate. Alternatively, you can watch our installation videos and follow the step-by-step instructions to make adjustments.

125 Glass Gate Hinge Installation Video
155 Glass Gate Retrofit Installation Video
156 Utility Hinge Installation Video

2.  Regular Maintenance for Long-Lasting Performance

Easy care maintenance tips to ensure your Polaris hinges continue functioning smoothly:

• Rinse Off Build-Up: Grab a hose and give the latch and hinge a good spray to remove any salt or dirt that may have accumulated. Then dry with a clean rag.

• Functionality Check: Open the gate to 90 degrees then let it go and make sure the latches are closing
  completely. Then do the same at 20 centimeters.

• Tighten the Screws: If required, use a number four Allen key to tighten the fixing screws on the pool side of the gate. This will prevent the gate from dropping and ensure smooth operation.

• Adjust the Closing Speed: If you find the closing action of your hinge is too fast or too slow, it may need
  adjustment. Our hinge installation video provides clear instructions on how to adjust the hinge speed for
  perfect functionality.